MOVEMENT-SYSTEMS 2021.22

Packaging units are not covered in this catalogue; please enquire with your supplier. 562 PLANNING DIMENSIONS Inserting the drawer Place the drawer on the extended Dynamoov slides and slide in until it audibly engages. Removing the drawer Pull out the drawer, actuate the lever of the front locking device on both sides and pull the drawer forwards, away from the slide. DYNAMOOV TIPMATIC Front gap adjustment (max. +1.5 mm) Front gap adjustment from above Front gap adjustment from below The reliable opening and closing of the drawer depends on the front gap setting (min. 4.5 mm = factory setting). If the front height is greater than 300 mm, the front gap must be increased to the maximum of 6 mm. +1.5 mm min 4.5 mm NOTES Mounting of cabinet members: The screw recommendations are intended for reference. Assemblers must ensure that the substrate material is thick enough. PAGE REFERENCES Dynamoov Soft-close 556 Dynamoov Self-close 558 Dynamoov Tipmatic 560 Assembly aids 668 Dynamoov.. Technical information.. Dynamoov  Technical information